Portable Group Lock Box features a durable powder-coated red finish.

• Accommodates up to 12 workers, or more with use of lockout hasps, lock box secures each lockout point on a piece of equipment with just one designated lock.

• Box captures keys from those lockout points by placing them in the lock box.

• Each authorized employee locks one personal safety lock onto the box and removes them only when their work is complete.

• Latch feature ensures that keys cannot be accessed until the last lock is removed.

Properly setting up lockout and tagout for equipment prevents injuries to the workers who are servicing, repairing, or adjusting the equipment. Group lockout/tagout procedures can be different and may be site-specific depending on the company, project, or job site however, only trained and authorized workers can perform the work under lockout/tagout.

Whenever possible group lockout/tagout procedures will require that each individual attach their assigned lock to the energy-isolating device. Lockout hasps, latches, clasps or similar devices should be used whenever possible so that each worker can be protected using their own locks and tags. However, when this is not possible due to a large group or the design or location of the energy-isolating device then a group lockout/tagout may be necessary.

A lockout tagout lock box is a storage device that keeps safety padlock keys locked and secure against unauthorized access. It is especially effective when two or more personnel work or service a single machine or piece of equipment.

Group lockout/tagout steps could include:

Choose a single representative for each team, department, company, or contractor organization.

Assign locks/tags and for each person in each group, as well as for the team representative.

Follow normal lockout/tagout procedures and have the team representative use the team’s lock and tag.

Place the team key inside of the lock-box. A lock-box or other device is used to hold the single key that is attached to the equipment to be locked out.

Each team member uses their lock and tag on the lock-box. This ensures that the equipment cannot be turned on until all locks are removed and every team member is safe.

When using a group lockout/tagout process, one authorized employee is designated with the primary responsibility for a specific number of other workers. All persons assigned to the representative are working under the protection of a group lockout and tag. A checklist should be used that has the name, identification number, and contact information for all workers in the group. Each person may be required to sign on the list to show they are present before they apply their lock and tag to the equipment or lock box.

During the work, the authorized representative for the group must have a way to know the status of each person on the team or group.

After the work and before removal of the group lock and tag from the equipment, the responsible authorized employee must verify everyone in the group is counted.

Group lockout/tagout procedures may change depending on the specific site, project, or job, but in every situation only trained and authorized workers can perform the work under lockout/tagout.

Product Type:

Combined Lock Storage & Group Lock Box

Number of Padlock Holes:13

Padlock Storage Capacity:40

Color:Red

Material:Steel

Printed On Lock Box:Lock Box Lock Out For Safety